Instructions / Assembly

CHAPTER 5: COMMUNICATION PROGRAMMING
59
4. Press the ENTER key.
ENTER
LOCK
The 1800 will say “Code [number] Erased.”
If no User Codes are programmed, the unit automatically defaults to
Single-User mode (i.e., the default code of “555”).
ALARM HISTORY
The 1800 will retain historical information on the last 10 alarms. The
information retained includes: Zone number, the time/date that the alarm
occurred, and the User number that acknowledged the alarm.
TO HEAR THE ALARM HISTORY:
1. Press the WHAT IS key.
WHAT IS
2. Press the HISTORY key.
HISTORY
MUTE
The unit will recite the history for the last 10 alarms. A sample report is
shown below:
“Zone 1 (custom message) alarm high at 3:31 April 8, 2005
acknowledged by number 4”
“Zone 3 (custom message) alarm low at 2:35 March 27, 2005
acknowledged by number 1”
In Single-User mode, the report will state “Alarm acknowledged” for alarms
acknowledged via telephone. It will state “Manual acknowledgment” for
alarms acknowledged at the keypad. In Multiple-User mode, the report will
state the user number that acknowledged the alarm. If the maximum num-
ber of calls have been made, the report will state “Automatic acknowledg-
ment.”