Instructions / Assembly

56
SENSAPHONE 1800 User’s Manual
TO MANUALLY DIAL A PHONE NUMBER:
1. Press the SET key.
SET
2. Press the TEST key.
TEST
°F/°C
The 1800 will say “Enter number.”
3. Press 0, then ENTER to enter manual dialing mode. The 1800 will go
off-hook and you should hear a dial tone through the speaker. Press any
number keys to dial a telephone number.
0
ID
POWER
ENTER
LOCK
4. Press ALARM CANCEL to hang up and exit the test.
ALARM
CANCEL
ALARM ACKNOWLEDGMENT CODES
When the 1800 detects an alarm, it starts dialing each telephone number
until it receives acknowledgment or reaches the maximum number of calls.
There are two acknowledgment modes: The default, Single-User mode
is for users who are not concerned with knowing who responds to and
acknowledges the alarm. In this mode, the default code of “555” is used. In
Single-User mode an alarm can be acknowledged by pressing the ALARM
CANCEL button on the keypad, or by entering the Acknowledgment Code
of 555 over the telephone using touch tones.
In Multiple-User mode, up to 8 custom Acknowledgment Codes can be
created in order to track who acknowledges alarms. These are 5-digit cus-
tom codes, replacing the default “555.” The 5-digit Acknowledgment Code
comprises the user’s entry number (1–8) plus a four-digit number. Up to
eight different Acknowledgment Codes may be programmed into the unit
to identify individual users in the Alarm History Log.
When the unit makes a telephone call in Voice mode it will prompt the user
to enter an Acknowledgment Code. If this is entered correctly, the 1800 will
say “Alarm Acknowledged.” When an alarm message is sent to a pager, the
person who receives the page will have to call the unit back to acknowledge