Instructions / Assembly

48
SENSAPHONE 1800 User’s Manual
ALARM DIAL-OUT TELEPHONE NUMBERS
The Sensaphone 1800 will dial up to eight 48-digit phone numbers to report
alarm conditions. These are the numbers that will be called during an alarm
dial-out. The unit can deliver an alarm message via voice telephone call or
numeric page. The telephone numbers are dialed sequentially 1 through 8.
Therefore, program the first number you want called as Phone #1, the sec-
ond one as Phone #2, and so on. A pause, pound or asterisk can be added to
the phone number to access different phone and beeper systems (see special
dialing options). Once the alarm is acknowledged, all dial-out stops.
VOICE DIALOUT
When 1800 calls in Voice mode it will announce the ID Message and the
alarm message. Afterward it will ask for the acknowledgement code. If
a correct code is entered, the unit will stop dialout. If the wrong code is
entered it will hang up and continue dialing the next number.
TO PROGRAM A VOICE DIAL-OUT TELEPHONE NUMBER:
1. Press the SET key.
SET
2. Press the PHONE NUMBER key. The 1800 will say “Enter Number.”
PHONE
NUMBER
T/P
3. Select which Phone number to program. Press any unassigned number
key (keys 1–8) to represent the new telephone number entry. 1800 will
respond “Enter number.”
1
CALL
DELAY
4
MAX
CALLS
7
RECOGNITION
TIME
8
RESET
TIME
5
ALARM
LIMITS
6
2
VOICE
REPS
3
INTERCALL
TIME
CALIBRATE
ENTER
LOCK
4. Enter the phone number using the number keys, and then press
ENTER. Be sure to enter “1” + area code if required. If installed on a
PBX system, be sure to enter a “9” if required.