Instructions / Assembly

46
SENSAPHONE 1800 User’s Manual
2. Press the MESSAGE key.
MESSAGE
The 1800 will say “Enter message number.”
3. Press the Zone Number or ID key.
1
CALL
DELAY
4
MAX
CALLS
7
RECOGNITION
TIME
8
RESET
TIME
5
ALARM
LIMITS
6
2
VOICE
REPS
3
INTERCALL
TIME
CALIBRATE
0
ID
POWER
The 1800 will say, “Message erased.”
ID NUMBER
The ID Number is the identification number of the 1800. This number is
typically the telephone number where the unit is installed, or it may be
designated using any number that best suits your application. The purpose
of the ID Number is to immediately provide the source of any alarm, espe-
cially when using multiple 1800 units in a complex monitoring system. The
ID number is announced during voice alarm messages and displayed on
pagers. The ID Number can be up to 16 digits long.
When the 1800 is called from a remote location, it always begins its mes-
sage with the identification number: “Hello, this is (ID Number).” If no ID
Number is programmed, the unit will say, “Hello, this is Sensaphone 1800.”
TO PROGRAM THE ID NUMBER:
1. Press the SET key.
SET
2. Press the ID key (number 0 key).
0
ID
POWER