Instructions / Assembly

28
SENSAPHONE 1800 User’s Manual
ENTER
LOCK
The 1800 will recite the programmed Zone input configuration.
ENABLE/DISABLE ZONE ALARMS
This function allows you to enable or disable a Zone (1-4) for dialout dur-
ing an alarm. An enabled Zone will respond to an alarm and allow dialout.
A disabled Zone will not initiate a dialout, but it will still be included in
the status report, preceded by the word “disabled.” This command is useful
while you are wiring your Zones or at any other time you would like the
alarms to be ignored. The default setting for all Zones is enabled (on).
1. Press the SENSOR ON/OFF key.
SENSOR
ON/OFF
2. Press the corresponding number key (1–4) of the Zone you want to
enable/disable. 1800 will say “Zone (1–8) Alarm On/Off ” to indicate
enabled or disabled respectively.
1
CALL
DELAY
4
MAX
CALLS
7
RECOGNITION
TIME
8
RESET
TIME
5
ALARM
LIMITS
6
2
VOICE
REPS
3
INTERCALL
TIME
CALIBRATE
3. Repeat key sequence to change.
ENABLE/DISABLE SOUND LEVEL ALARM
This function allows you to enable or disable the sound alarm for dialout.
When enabled, a high sound level at the remote microphone (optional)—
that meets the programmed recognition time and level—will trip a sound
alarm and the unit will dial out. Disabling sound will prevent a sound alarm
dialout. The default setting is enabled (on).
1. Press the SENSOR ON/OFF key.
SENSOR
ON/OFF
2. Press the Sound Alarm key (9). 1800 will say “Sound Alarm On/Off ” to
indicate enabled or disabled respectively.