Instructions / Assembly

98
SENSAPHONE 1800 User’s Manual
Temperature Scale Selects between Fahrenheit and Celsius
[SENSOR ON/OFF] + [TEST/°F/°C]
Fahrenheit or Celsius Default=Fahrenheit
Temperature-Only Status A limited status report that only includes inputs
Report configured as temperature.
[WHAT IS] + [TEST]
Designating a Zone Unused Removes zone from status and alarm reports
[SENSOR ON/OFF] + [SET] + [zone #]
On or Off Default=on
Special Functions
Dial-Out Test Mode Simulates alarm to test telephone programming
[SET] + [TEST] + [# key 1–8]
Default=none
Listen-In Time Length of listen-in time during call-in status report
[SET] or [WHAT IS] + [LISTEN TIME]
Min: 0 sec, Max: 255 sec Default=00:00 (min:sec)
Acknowledgment Code To create an individual user’s 4-digit acknowledgment code
[SET] + [CODE] + [# key 1–8]
Default=555 for single-user mode
Date & Time Internal clock/calendar
[SET] or [WHAT IS] + [DATE/TIME]
Date: mmddyy, Time: hhmm Default=none
Alarm History Recites last 10 alarms
[WHAT IS] + [HISTORY]
Default=n/a
Reset History Clears the alarm history
[SET] + [HISTORY]
Default=n/a
Switch Output Turns output relay on or off (in manual mode)
[SENSOR ON/OFF] + [OUTPUT]
On or Off Default=off
Output Mode Program relay output as manual or automatic for specific zone
[SET] or [WHAT IS] + [OUTPUT] + [mode number]
Default=manual(11)
Remote Security Prohibits programming changes via telephone
[SET] or [WHAT IS] + [ENTER/LOCK] + [4 digit code]
Default=unlocked
Press [ENTER] after all Key Sequences starting with [SET].
Use [SET] to establish parameters, [WHAT IS] to verify them.