Full Product Manual

Sensaphone 1400 Manual
92
Belowisanexampleofwhatthe1400mightsayduringatypical
“voice” dialout:
“Hello, this is 555-2278, ‘Acme Medical Laboratory,’ Zone One,
‘Temperature in Refrigerator One,’ a high temperature alarm
exists,itisnow50degreesFahrenheit,toohigh.Listentosound
for ten seconds.”
“Hello, this is 555-2278, ‘Acme Medical Laboratory,’ Zone One,
‘Temperature in Refrigerator One,’ a high temperature alarm
exists,itisnow50degreesFahrenheit,toohigh.Listentosound
for ten seconds.”
“Hello, this is 555-2278, ‘Acme Medical Laboratory,’ Zone One,
‘Temperature in Refrigerator One,’ a high temperature alarm
exists,itisnow50degreesFahrenheit,toohigh.Listentosound
for ten seconds.”
“Enter acknowledgment code.”
Inthisexample,thenumberofVoiceMessageRepetitionswasset
to three.
NOTE: If the call reaches an answering machine,
the message will be recorded, but the 1400 will be
talking over your outgoing message, so you will
probably lose part of the first alarm message repeti-
tion.
Alarm Dialout—Pager
When dialing out to a destination programmed as “Numeric Pager,”
the 1400 leaves its programmed ID number on the display of a
numericpageralongwiththezonenumber(s)inalarm.
IMPORTANT: When dialing out to a phone number programmed as
“Numeric Pager,” the 1400 DOES NOT speak a voice message. It
calls the pager company or service, enters the number to be displayed
on the beeper, then hangs up.