Full Product Manual

Chapter 6: Controlling the Output

Mode 6: Output on when a Power alarm occurs. Off when alarm is

acknowledged.

Mode 7: Output on when any alarm occurs. Off when all alarms

are acknowledged.

MANUAL MODE

Mode 0: Output controlled manually via keypad command or

touch-tone telephone.

When programmed for Manual mode, the command to switch the

output is:

SENSORON/OFF+OUTPUT.

SENSOR

ON/OFF

OUTPUT

PAUSE

The 1400 will respond “ON” or “OFF” to indicate the state of the

output.

Note: If the 1400 says “Error,” the output is not

programmed for manual mode.

To program the Output Mode:

1. Press the SET key.

SET

2.PresstheOUTPUTkey.

OUTPUT

PAUSE

The 1400 will say “Enter output mode.”