Full Product Manual

Sensaphone 1400 Manual
68
ALARM ACKNOWLEDGMENT CODES
When the 1400 detects an alarm, it starts dialing each telephone
numberuntilitreceivesacknowledgmentorreachesthemaximum
number of calls. There are two acknowledgment modes: The
default,Single-Usermodeisforuserswhoarenotconcernedwith
knowing who responds to and acknowledges the alarm. In this
mode,thedefaultcodeof“555”isused.InSingle-Usermodean
alarm can be acknowledged by pressing the ALARM CANCEL
button on the keypad, or by entering the Acknowledgment Code of
555 over the telephone using touch tones.
InMultiple-Usermode,upto8customAcknowledgmentCodes
can be created in order to track who acknowledges alarms. These
are 5-digit custom codes, replacing the default “555.” The 5-digit
AcknowledgmentCodecomprisestheuser’sentrynumber(1–8)
plusafour-digitnumber.UptoeightdifferentAcknowledgment
Codes may be programmed into the unit to identify individual users
in the Alarm History Log.
When the unit makes a telephone call in Voice mode it will prompt
the user to enter an Acknowledgment Code. If this is entered
correctly, the 1400 will say “Alarm Acknowledged.” When an
alarm message is sent to a pager, the person who receives the
page will have to call the unit back to acknowledge the alarm. In
Single-Usermode,theusermustenter“555”toacknowledgethe
alarm.InMultiple-Usermode,theusermustenterhisorher5-digit
Acknowledgment Code.
To Program Multiple-User Acknowledgment Codes:
1. Press SET
SET
2. Press CODE
CODE
The 1400 will say “Enter Code Number.”