Full Product Manual

Sensaphone 1400 Manual
66
DIAL-OUT TEST MODE
The 1400 allows you to test your telephone programming by
simulating an alarm dialout to any programmed telephone number.
This can be a valuable tool for insuring that your programming
is correct and also for troubleshooting dialing problems. In this
mode all signals on the telephone line are audible through the local
speaker.
To test a dialout phone number:
1. Press the SET key.
SET
2. Press the TEST key.
TEST
°F/°C
The 1400 will say “Enter Number.”
3.Pressanumberkey(1–8)correspondingtothephonenumber
entry you wish to test, and press ENTER.
4
MAX CALLS
1
CALL DELAY
2
VOICE REPS
3
INTERCALL
TIME
5
ALARM LIMITS
6
CALIBRATE
7
RECOGNITION
TIME
8
RESET
TIME
ENTER
LOCK
The 1400 will dial the number
and announce the date and time for voice calls, or send its ID
number for pager calls.
To manually dial a phone number:
1. Press the SET key.
SET