Full Product Manual

Chapter 5: Communication Programming
51
DATE and TIME
The 1400 has an internal clock/calendar that is used to time-stamp
events and maintain alarm history. To program the date and time:
1. Press SET, followed by the DATE/TIME key.
SET
DATE
TIME
2. The unit will say “Enter the date.” Enter the date in month/day/
year(mm/dd/yy)formatusingtwodigitsforeach.Forexample,
if the date was January 7, 2017 you would enter 010717, then
press ENTER.
ENTER
LOCK
3.Next,theunitwillsay“OK,enterthetime.”Enterthetimein
24-hourformat(e.g.3:00
pm=15:00)usinghours/minutes(hh/
mm)format.Forexample,ifthetimewas1:30
pm you would
enter 1330, then press ENTER.
ENTER
LOCK
4. To check the date and time press WHAT IS, followed by DATE/
TIME. The unit will announce the date and time.
DATE
TIME
WHAT IS
NOTE: The internal clock is powered by an
onboard lithium battery which should provide 8–10
years of service life.
To program only the Date or only the Time, you can simply press
the ENTER key when prompted and the unit will keep its current
value.Forexample,toprogramanewTIMEbutkeepthecurrent
DATE, press [ENTER] when prompted for the Date. The unit will
keep the current setting and then prompt you to enter the new Time.