Full Product Manual

Sensaphone 1400 Manual
48
The 1400 will respond by saying Zone 1–4, Power, or Sound “Off/
On.” Repeat the key sequence to place the Zone back in use.
EXIT DELAY
TheExitDelayfeatureisusefulwhenyouareusingyour1400
forsecuritymonitoring.Thisfeatureallowsyoutoexitabuilding
without tripping a security alarm. When tripping an alarm is
unavoidable, yet a true alert condition has not actually occurred, the
alarm response—including dial-out—can be temporarily suppressed.
The 1400 is able to suppress and then reset its dial-out function
automatically through use of the Status Report. This is especially
convenientwhenanalertconditioniscreateduponexitinga
monitored door, and there is no way to cancel from the local
keypad.
Note:TheExitDelayfeatureappliesonlytoZones
configured as NO/NC.
Example:Youareplanningtoexitthroughamonitoreddoor.Prior
toexiting,youinitiateaStatusReportrecitationatthe1400keypad
bypressing[WHATIS],followedby[STATUS],(keysequence
shownbelow).Thisallowsyouthedurationofthestatusreportto
exitwithoutactivatingthe1400’sprogrammedresponsetoanalarm.
At the conclusion of the status report, normal alarm response is
reactivated.
1. Press WHAT IS.
WHAT IS
2.PressSTATUS.
STATUS
CONFIGURE