Full Product Manual

Chapter 4: Zone Programming
47
Number.”
6
CALIBRATE
3.PresstheSOUNDkey.
9
LISTEN TIME
SOUND
The 1400 will recite the programmed sound sensitivity level.
DESIGNATING A ZONE AS UNUSED
This feature allows you to mark selected Zones, Power, or Sound
as unused, which will prohibit them from going into alarm and will
also leave them out of the status report. Note that programming
for the selected Zone will be preserved when the Zone is marked
as “unusued” and will not be reconfigured if automatic Zone
configuration is activated.
If the sensor is configured as not used, the unit will respond “Error
the zone is off ”. Refer to section 5.13 to designate as used.
1. Press the SENSOR ON/OFF key.
SENSOR
ON/OFF
2. Press the SET key.
SET
The 1400 will say “Enter Zone Number.”
3. Press the corresponding number of the Zone you
wish to mark as unused.
4
MAX CALLS
1
CALL DELAY
2
VOICE REPS
3
INTERCALL
TIME
5
ALARM LIMITS
6
CALIBRATE
9
LISTEN TIME
SOUND
7
RECOGNITION
TIME
0
ID
POWER
8
RESET
TIME