Full Product Manual

Sensaphone 1400 Manual
44
3. Press the corresponding Zone key (1-4), Power (0), or Sound (9).
4
MAX CALLS
1
CALL DELAY
2
VOICE REPS
3
INTERCALL
TIME
The 1400 will recite the programmed Reset Time for that Zone. If
the Reset Time is set to 0 minutes the 1800 will say “Disabled”.
ZONE CALIBRATION
Due to tolerance variations or other factors, you may need to
program an offset to calibrate the sensor. The offset can range from
-15 to +15 for Zones configured as temperature, and -100 to +100
for Zones configured as 4–20mA. Setting a positive number will
add that number to the Zone reading. Setting a negative number will
subtract the programmed value from the Zone reading. For instance,
if a temperature sensor consistently read two degrees high, you
couldusethecalibrationfeaturetoadjustthattemperaturedown
two degrees. To make a value negative, precede the value with the
[RINGS/TAD/*] Key.
1. Press the SET key.
SET
2.PresstheCALIBRATEkey.
6
CALIBRATE
The 1400 will say “Enter Zone Number.”
3.PressthecorrespondingZonekey(1–4).
4
MAX CALLS
1
CALL DELAY
2
VOICE REPS
3
INTERCALL
TIME