Full Product Manual

Sensaphone 1400 Manual
28
When preparing wire for connection to the terminal blocks, strip 4"
ofinsulationfromtheconductor(seefigurebelow).
.25"
Figure 6: Wire stripped for connection
LED INDICATORS
The LEDs provide on-site alarm and status information. Listed
below are descriptions of how the LEDs work.
Zones 1–4, Power and Sound:
LED Off: Zone OK
 LEDBlinkingFast:Alarmconditionexistsbut
recognition time has not been met
 LEDBlinkingSlowly:Unacknowledgedalarmexists
 LEDOn:Acknowledgedalarmexists
Battery:
 LEDOn:BatteryOK
 LEDBlinking:Batteryconditionlow
LED Off: No battery/critically low battery condition
Output On:
LED On: Output relay on
LED Off : Output relay off
Phone-In-Use:
 LEDOn:Unitiscommunicatingonthephoneline
 LEDOff:Unitisnotusingthephoneline
System-On:
LED On: System power on
LED Off : System power off