Full Product Manual

Sensaphone 1400 Manual

Locking the Enclosure

The 1400 enclosure can be locked by installing a small

luggage-style padlock through the loop on the front door of the

enclosure. See Figure below.

Figure 2: Locking the Enclosure

Grounding

Connectaheavygauge(#14AWG)copperwiretotheearthground

terminal on the left end of the panel and connect the other end to a

groundrodormetalcoldwaterpipe(SeeFigure3).Itisextremely

important that the earth ground connection be as short as possible.

The ground rod should have sufficient depth to provide a low

impedance connection to earth. This connection is required for the

surge/lightning protection circuits to function properly.

NOTE: Proper earth grounding of the 1400 is

required for warranty coverage.

Ground rods can typically be found at local electrical supply houses

and/orhardwarestores.Besuretocontactyourstate “Call before

you dig” hotline at least two days before you install your ground

rod, to insure that it is safe to install the ground rod in a chosen

area.