Full Product Manual

Appendix C: Troubleshooting
113
Cause
Incorrect zone configuration.
Solution
Reconfigure the zone. See Chapter 4.
OTHER MONITORING:
Problem 1
Alarm status of a zone is incorrect.
Cause
Programmed Recognition Time is too
short.
Solution
ACpowermaybesubjecttobrief
interruptions. To avoid frequent,
false alarms, increase the power
Recognition Time.
Refer to Chapter 4.
Problem 2
False power-out alarms.
Cause
a)Batteryiseitherincorrectly
installed or drained.
b)Recognitiontimesettingistoo
long.
Solution
To verify proper battery function,
unplug the unit and verify continued
operation using battery only. If unit
ceases to function, replace the battery.
RefertoAppendixB.
Reprogram Recognition Time. Set the
Recognition Time to the minimum
required before a valid alarm
occurs. If possible, test the condition
by deliberately creating an alert
condition. Refer to Chapter 4.
Problem 3
The 1400 does not recognize power failure.