Full Product Manual

Chapter 7: Operation
99
Special Dialing Codes Summary
Code 1: Numeric pager type
Code 2: Wait for answer
Code 3: Change to Touch-Tone
Code 4: Pause
Code 5: *
Code6:#
Description Touch-Tone Command
Settingaphonenumber S(7)+T(8)+(entry1–8)+(telephone
 number)+#
Description Touch-Tone Command
Reciting a phone number W(9)+T(8)+(entry1–8)
Record and Play Custom Voice Messages
The following commands will allow you to record and play
backcustomvoicemessagesfortheIDmessage(0)andeach
zone(1–4).
Description Touch-Tone Command
Record a Message S(7)+M(6)+(entry0–4)
Description Touch-Tone Command
PlayaMessage W(9)+M(6)+(entry0–4)
Control the Relay Output
The following commands will allow you to check the status of
the relay output and to toggle the Relay Output On and Off.
Description Touch-Tone Command
Reciting the Output Status W(9)+R(7)+O(6)
Description Touch-Tone Command
SwitchingtheOutput S(7)+R(7)+O(6)
Activate Microphone Listen-in
The following command will allow you to activate the
microphone listen-in for the programmed duration.
Description Touch-Tone Command
ActivateMicListen-in M(6)+I(4)+C(2)