Full Product Manual

Sensaphone 1400 Manual
98
The tables below list all of the touch-tone commands that are
supported. Commands are listed in both character and numeric
formats.The#keyisusedasanENTERkey.Usethe*keyto
represent a negative sign or to represent the [CODE] key when
programming telephone numbers.
Enable/Disable Zones
This command will toggle the selected zone between the
enabled or disabled state.
Description Touch-Tone Command
Enable/DisableZone *+Z(0)+(zonenumber)
Set and Recite High & Low Alarm Limits
The following commands are used to set or recite the Low
Alarm Limit for any Zone.
Description Touch-Tone Command
Set Zone Low Limit S(7)+L(5)+(zonenumber)+(value)+#
Description Touch-Tone Command
What Is Zone Low Limit W(9)+L(5)+(zonenumber)
The following commands are used to set or recite the High
Alarm Limit for any Zone.
Description Touch-Tone Command
Set Zone High Limit S(7)+H(4)+(zonenumber)+(value)+#
Description Touch-Tone Command
What Is Zone High Limit W(9)+H(4)+(zonenumber)
Set and Recite Telephone Numbers
The following commands will allow you to program and recite
dialout telephone numbers. You may need to use the Special
Dialing Codes below.