Compatibility Chart
Infrared Motion Detection Sensor
This passive infrared motion detector can be
used with all Sensaphone models to monitor
the movement of warm bodies in a specic area.
It will cause an alarm if motion is detected. It’s range of
detection covers approximately forty feet of area. Multiple
sensors can be wired in series to a single output.
Infrared Motion Detection Sensor .........................FGD-0007
Smoke Detection Sensor
This photoelectric smoke alarm is powered
by a hard wired 120VAC connection and
provides an alarm output to trigger a
Sensaphone alarm dial out. Works with all
Sensaphone products.
Smoke Detection Sensor for 120VAC ......................FGD-0049
Smoke Detector w/battery backup .....................FGD-0049-B
Float Switch
Side mounted oat switch
that is effective in level
control applications in small tanks where it is more
convenient to install a level switch through the sidewall of
the tank. Can be set to normally open or closed.
Float Switch .............................................. FGD-0222
Multi-Point Wireless I/O
This matched transmitter and receiver
accepts two contacts and one 4-20mA
signal and replicates them up to 5 miles
away (line of sight). Perfect for connecting
distant equipment to your Sensaphone.
Multi-Point Wireless I/O ..................................FGD-0205
Surge Suppressor for Power &
Phone
Protects Sensaphone products from high
voltage surges through AC power and
telephone lines. Particularly important
in areas of high lightening activity. Works with all
Sensaphone products except the SAT4D.
Surge Suppressor for Power and Phone ...................FGD-0067
Carbon Monoxide (CO) Sensor
Carbon Monoxide is a highly toxic gas that
has no color or odor. The Sensaphone Carbon
Monoxide sensor will allow you to monitor CO
levels from 0-300 ppm with any Sensaphone that will
accept a 4-20mA input signal. The 1” x .5” LCD displays the
PPM and menu parameters
Carbon Monoxide (CO) Sensor .............................FGD-0065
Air Quality Sensor
The air Quality sensor will monitor levels of
pollution from 0–100% with Sensaphone 1400
or 1800. Air contaminants can include cigarette
smoke, cooking exhaust, automobile exhaust, solvents and
many others..
Air Quality Sensor .........................................FGD-0066
Carbon Dioxide (CO2) Sensor
The Sensaphone Carbon Dioxide sensor
will monitor levels of Carbon Dioxide from
0-2,000ppm.
Infrared Motion Detection Sensor .........................FGD-0068
LIT-xxxx © SENSAPHONE 6/2013
SENSAPHONE
®
901 TRYENS ROAD
ASTON, PA 19014
PH: 877-373-2700
F: 610-558-0222
WWW.SENSAPHONE.COM
Distributed By:
A complete accessory specication sheet is available for all sensors and accessories. A complete parts list is available upon request or at
www.sensaphone.com. All specications subject to change.