Compatibility Chart
Sensaphone 1400 & 1800 Series
2.8K Room Temperature Sensor
Designed to monitor air temperature in
a clean, indoor, environment.
2.8K Type Temperature Sensor ............................FGD-0100
2.8K Ultra Low Temperature Sensor
When temperatures dip below -20°, this
sensor provides reliable monitoring. Works
in temperatures from -109 to 168° when used with the
Sensaphone 1400 and 1800.
2.8K Type Weatherproof Temperature Sensor .........FGD-0101-TEF
Weatherproof
Temperature Sensor
Small, sealed, general purpose temperature
probe for indoor or outdoor use. Monitor temperatures
from -20 to 168°F when used with the Sensaphone 1400 or
1800. Comes with 12 feet of wire.
10K Type Weatherproof Temperature Sensor .............FGD-0102
2.8K Type Weatherproof Temperature Sensor ..............FGD-0101
2.8K Temperature Sensor
in Glass Bead Vial
Ideal for cold storage temperature monitoring,
the glass bead vial will buffer any momentary
uctuations that may cause a preliminary
alarm dial out such as defrost cycles, opening of doors,
and fans circulating air. Monitor temperatures from -20
to 168°F when used with the Sensaphone 1400 or 1800.
Comes with 12 feet of wire.
2.8K Type Temperature Sensor in Glass Bead Vial ......... FGD-0107
Temp Alert Temperature Switch
Wall mount, mechanical temperature
sensor to detect if air temperature is too
high or too low. Alarm limits are adjustable from -30° to
130° F.
Contact Type Temp Alert Temperature Switch ............FGD-0022
Humidity Sensor
A space mount, low prole humidity transducer
that transmits actual humidity levels to a
Sensaphone for programmable high and low
alarm limits.
4-20mA Humidity Sensor .................................. FGD-0052
PowerOut Alert Power Failure Switch
A compact power outage monitoring device to
detect power failures. Easily plugs into any 110
VAC receptacle outlet for operation. .
Contact Type PowerOut Alert Power Failure Switch .......FGD-0054
Magnetic Reed Door &
Window Switch
The magnetic reed switch may be used
to detect any unauthorized entry or intrusion. They are
usually installed on doors and windows to detect their
opening and closing. Several magnetic reed switches may
be wired in series.
Contact Type Magnetic Reed Door and Window Switch ...FGD-0006
Spot Water Detection Sensor
The water detection sensor can be used
to detect the presence of water on a
horizontal surface. Independently powered by internal
lithium batteries which last 3-5 years. Multiple sensors can
be wired in series to a single input.
Contact Type Spot Water Detection Sensor ............... FGD-0013
Zone Water Detection Sensor
For use in detecting the presence of
water on a oor or in a false ceiling.
Comes with 10’ of WaterRope cable to
cover a larger area than the FGD-0013 water
sensor. Up to ten WaterRopes can be cascaded from a
single sensor for even greater coverage. .
Zone Water Detection Sensor .............................FGD-0056
Additional 10’ of Water Rope ..............................FGD-0063
Expand the Capabilities of your Sensaphone