SDS

Report No.: HPKJ20141104MSDS02 Page 4 of 7 Pages
SECTION 7 – HANDLING AND STORAGE
Handling:
1. Do not allow battery terminates to contact each other, or contact with other metals.
2. Do not put the cell or battery into a fire or heat it. Do not solder the cell directly. Do not use or leave the cell or
battery in a place near fire or heaters.
3. Do not expose the battery to excessive physical shock or vibration.
4 Do not immerse, throw, and wet a battery in water.
5 Short-circuiting should be avoided. Short circuit will reduces the life of the battery and can lead to ignition of
surrounding materials. Physical contact with to short- circuited battery can cause skin burn.
6. The batteries should not be opened, destroyed or incinerate, since they may leak or rupture and release to the
environment the ingredients that they contain in the hermetically sealed container.
7. Place the cell beyond the child packing and container.
8. Do not connect the battery directly to an electric outlet or cigarette socket in a car.
9. Be sure to use the specified charger for battery, and follow the charging instructions correctly.
10. Do not mix old and new batteries together, neither with Ni-Cd, dry batteries or another manufacturer batteries or
product.
Storage:
1. Batteries should be separated from other materials and stored in a noncombustible, well ventilated,
sprinkler-protected structure with sufficient clearance between walls and battery stacks.
2. Keep the sample in the cool, dry and well-ventilated place(temperature:-20~30degree C humidity:45~85%).
Do not exposure to direct sunlight for long periods. Keep away from fire and heating sources. Don’t keep the
samples with oxidizer and acid.
3. charge the battery every 6 months to the amount specified by the manufacture, even if the battery is not used.
4. Equip with relevant types and quantities of the extinguishment instruments. The storage place should be equipped
with suitable shelter materials for divulgence handling.
SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Control:
Keep away from heat and open flame. Supply with sufficient partial air exhaust. Store in a cool, dry place.
Respiratory Protection:
Not necessary under conditions of normal use. Wear self-contained breathing filtermask if the density exceed in the
air. Wear breathing apparatus under the condition of emergency rescue or evacuation.
Eyes Protection:
Not necessary under conditions of normal use. Wear protective glasses if handling a leaking or ruptured battery .
Body Protection:
Not necessary under conditions of normal use. Wear fireproofing, gas defense clothes in case of handling a leaking or
ruptured battery.
Hands Protection:
Not necessary under conditions of normal use. Wear chemical resistant rubber .
Other Protections:
No smoking, dining and drinking water in the workplace. Keep good habit of hygiene .