User`s guide
9
ORDERING INFORMATION
Control
PPC4000 Parallel positioning system, 120 VAC input. Used with flame safeguard control
NXCESVFD Plug-in assembly provides variable frequency (VFD/VSD) capability
60-2926 Enclosure, 12.5” x 10.5” x 6.5”, UL listed, fitted for PPC4000
129-190 Kit, fan replacement
Display
NXD410 User Interface with keypad, 24 VDC operation, 4 line back lit LCD display, panel mount only, includes mounting brack-
ets.
59-562-2 Cable assembly, 10 feet length, for interfacing NXD410 to PPC4000
NXTSD407 7” TFT wide color Touchscreen display, 800x480 pixel (WVGA) resolution, LED backlight, 24VDC, includes mounting
brackets
NXTSD413 13.3” TFT wide color Touchscreen display, 1280x800 pixel (WVGA) resolution, LED backlight, 24VDC, includes mount-
ing brackets
129-196-2 Replacement cable kit. Contains one 12’ communications, one 12’ power cable, and DB9 connector plug.
Servos
FX04 Servo motor, 24 VDC operation, 4Nm, 3 lb.-ft. torque, without connectors, accepts 1/2 inch NPT fitting, minimum travel
time of 30 seconds for 90°
FX04-1 Servo motor, 24 VDC operation, 4Nm, 3 lb.-ft. torque, with connectors, minimum travel time of 30 seconds for 90°
FX20 Servo motor, 24 VDC operation, 20Nm, 15 lb.-ft. torque, without connectors, accepts
1/2 inch NPT fitting, minimum travel time of 30 seconds for 90°
FX20-1 Servo motor, 24 VDC operation, 20Nm, 15 lb.-ft. torque, with connectors, minimum travel time of 30 seconds for 90°
FX50 Servo motor, 24 VDC operation, 50Nm, 37 lb.-ft. torque, without connectors, accepts
1/2 inch NPT fitting, minimum travel time of 30 seconds for 90°
FX50-1 Servo motor, 24 VDC operation, 50Nm, 37 lb.-ft. torque, with connectors, minimum travel time of 30 seconds for 90°
Servo Cables
59-565-6 Cordset, 6 feet, 1/2” NPT connectors on both ends, PVC jacket, temperature rating -40°C to 105°C, meets NEMA
1,3,4,6P and IEC67
59-565-40 Cordset, 40 feet, 1/2” NPT connectors on both ends, PVC jacket, temperature rating -40°C to 105°C, meets NEMA
1,3,4,6P and IEC67
Connector Kit
129-192 Connector, field wireable. Used for FX04-1, FX20-1, FX50-1 servos with connectors. Use cable 59-565
129-194 Male quick disconnect to convert non connector type FX series servos.
59-565 Cable, 1 twisted pair, 2 power wires, suitable for servo and Oxygen probe hookup.
O2 Probe
NXCES02-8, -16, -30 O2 probe assembly, insertion length is 8, 16, 30 inches
NXCES02P42, -1 Cartridge, probe replacement (model -1 for engineering code 00 only)
35-381-2 Flange, O2 probe mounting
129-189 Cover, mounting flange
Pressure Transducers
BLPS-15, -25, -30 Pressure transducer, 0 to15 PSI (0 to 1030 mb), -14.7 to 25 PSI (-1013 to 1720 mb), 0 to 30 PSI (0 to 2070 mb), 4-20
mA output linear with pressure. ¼” NPTF mounting. Screw terminal connections and conduit adapter cover.
BLPS-200 Pressure transducer, 0 to 200PSI (0 to 13.8 Bar), 4-20 mA output linear with pressure. ¼” NPTF mounting. Screw
terminal connections and conduit adapter cover.
BLPS-300 Pressure transducer, 0 to 300 PSI (0 to 20.7 Bar), 4-20 mA output linear with pressure. ¼” NPTF mounting. Screw
terminal connections and conduit adapter cover.
Temperature Transducers
TS350-2, -4, -8 Temperature sensor, Range 32°F to 350°F (0°C to 176°C), 4-20 mA output, linear with temperature. Insertion length is
2, 4, 8 inches. Stainless steel thermowell included.
TS-752-2, -4, -8 Temperature sensor, Range 32°F to 752°F (0°C to 400°C), 4-20 mA output, linear with temperature. Insertion length is
2, 4, 8 inches. Stainless steel thermowell included.
FXIATS-140 Ambient air temperature transmitter, -40°F to 140°F, 4-20mA output, 7 to 40VDC, NEMA enclosure