User guide

13
Upgrading from QuickPOS 5.0 to 5.1
You must upgrade QuickPOS Version 5.0 to Version 5.1
before removing it from your PC as described on page
15. After removing the software, you can install Retail
Point of Sale 2011/12 as described on page 15.
You will need to upgrade QuickPOS Administrator and all
instances of QuickPOS Terminal.
Upgrading QuickPOS Administrator
Close any programs you have running.1.
Insert the Retail Point of Sale 2011/12 Installation 2.
CD into the CD-ROM drive.
The Installer window opens automatically.
Click 3. Exit.
Open the QuickPOS 5.1 Installer wizard.4.
To open the QuickPOS 5.1 Installer wizard:
If running Windows XP operating system:
Click • Start in the Windows taskbar, then click Run.
Type • D:\POS51setup\QuickPOSAdmin\
setup.exe (where D: is your CD-ROM drive
letter). Click OK.
The QuickPOS 5.1 Installer wizard opens.
or
If running Windows Vista or Windows 7 operating
system:
Right-click the • Start button in the Windows taskbar,
then click Explore,
Select •D: (where D: is your CD-ROM drive letter),
then navigate to D:\POS51setup\QuickPOSAdmin\
setup.exe.
Double-click • setup.exe.
The Installer wizard opens.
Select 5. Modify, then click Next.