TeamConnect Network and IT configuration TI IS-1007 v1.
Contents Contents Introduction...............................................................................................................3 Configuration and connection possibilities...........................................................4 System configuration...............................................................................................5 Network information................................................................................................7 Core network settings..........
Introduction Introduction This document is an addition to the TeamConnect instruction manual. The instruction manual is available for download on the TeamConnect product page at www.sennheiser.com and provides detailed information on how to set up, connect and configure the complete TeamConnect system.
Configuration and connection possibilities Configuration and connection possibilities Connecting a computer for configuring the system For configuring the SL TeamConnect CU1 you need a computer with the Configuration Manager software installed. Please note that you need administrator rights for installing and using the Configuration Manager software.
System configuration System configuration The following illustration provides a schematic overview of the components and connections of the TeamConnect system. The components highlighted in orange must be accessible for the user in the meeting room. The components highlighted in blue form the system infrastructure. Meeting Room Combox System Infrastructure Component Explanation Telephone connection: The SL TeamConnect CU1 must be connected to an analog telephone network or system.
System configuration Component Explanation Loudspeakers: The speakers need to be installed in the meeting room. For further information refer to the instruction manuals of the TeamConnect system and the Sennheiser SL Loudspeaker 52 A. Microphones: The microphones need to be installed in the meeting room. For further information refer to the instruction manuals of the TeamConnect system and the Sennheiser SpeechLine IS Microphones series.
Network information Network information This chapter gives an overview of the main IT features and functionalities of the TeamConnect system. It also indicates the default settings of these features and functionalities.
Configuring the SL TeamConnect CU1 Configuring the SL TeamConnect CU1 This chapter describes how the IT relevant settings of the SL TeamConnect CU1 are configured in the Configuration Manager software. For further information on connecting cables to the SL TeamConnect CU1 refer to the TeamConnect instruction manual on the TeamConnect product page at www.sennheiser.com. To adjust the IT relevant configuration of the SL TeamConnect CU1: Install the Configuration Manager software on your computer.
Configuring the SL TeamConnect CU1 Networking tab Option Setting MAC address Indicates the MAC SL TeamConnect CU1 Device Name Defines the host name of the respective SL TeamConnect CU1 device in the network. The device name is also used to access the browser-based dialer (see page 11) and for manual connection in the iOS App (see page 12).
Configuring the SL TeamConnect CU1 Option Setting IP Filters Defines up to 4 IP filters. If an IP filter is defined, only the devices with the IP addresses entered in the IP Filters area can connect to the SL TeamConnect CU1 via a (W)LAN connection. Change Admin Login Defines the user name and password required to access the SL TeamConnect CU1 via a (W)LAN connection in the Configuration Manager software. Character restrictions: • all standard western characters • max.
The dialer The dialer There are two variants of the TeamConnect dialer application: the browser-based dialer and the mobile iOS App dialer. Both dialer versions have been developped for using the TeamConnect system for teleconferencing. In order to work properly, the dialers must be able to access all SL TeamConnect CU1 devices in the network which are used for conferencing.
The dialer The mobile dialer iOS App The mobile dialer is the iOS App version of the browser-based dialer. To download the App: Download the iOS App via the QR code on the left. or XX Download the iOS App via the following link: https://itunes.apple.com/app/teamconnect/id691162558 or XX Search for “Sennheiser TeamConnect” in the App Store. XX The App is installed on the iOS device and communicates with the SL TeamConnect CU1 via port 23 (Telnet).
The dialer Option Description Manual Selection The login information for the room must be entered manually after starting the App (Device Name and Room Password, see „Networking tab“ on page 9). XX Make sure that the iPad is able to connect to the SL TeamConnect CU1 via port 23. Connect to Predefined Room The App connects automatically to a predefined meeting room. The login data for the meeting room need to be specified under Setup in the App settings. See page 14.
The dialer Option Description UDP Broadcast A UDP broadcast is performed and all available rooms are displayed after starting the App. For this scenario, the iPad and the SL TeamConnect CU1 must be in the same network segment (subnet). Required network structure for this selection method: TeamConnect iOS Network SSID Setup In the Setup menu of the App settings you can specify the details for connecting to a predefined room or to display the available rooms specified in an XML configuration file.
The dialer XML Configuration File If XML configuration file is chosen as the selection method, you need to configure the following settings here: To create an XML configuration file for the room selection in the iOS App: Download the file TeamConnectConfig.xsd from the TeamConnect product page at www.sennheiser.com XX Create a new XML configuration file based on the XSD file you downloaded. XX Validate your XML configuration file against the XSD file.
The dialer External call prefix If your corporate telephone system requires a dialling prefix for an outside line, you can indicate this prefix here. The prefix entered here will be displayed in the dialling pad of the dialer reminding the user to dial the prefix for external calls. When choosing a contact from the local iOS contacts, the external call prefix will be added automatically.
The dialer Disable Screen Lock This function keeps the iPad from entering the screen lock while the TeamConnect application is in front. POSSIBLE LOSS OF CONNECTION If a telephone connection is active in the TeamConnect application and the iPad enters the screen lock, the telephone connection will be lost. We recommend activating this function.
Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com TI IS-1007 v1.
