User Guide

2023-01 | v2.0
Planning guide for system integrators
TeamConnect Ceiling 2
Minimum and maximum distances in the room
Each TCC2 mounting variant has different requirements regarding sound distribution and reflections
in the room. To ensure that speech is picked up with as little loss as possible, certain distances
should be maintained from reflective surfaces such as walls, ceilings and equipment, as well as from
presenters.
A microphone that is suspended too low or too high may result in a loss of level and
clarity in detected speech, as participants may be outside the actual coverage radius (see
“Sound distribution”).
Regardless of the type of installation, we recommend adhering to the following distances
during planning:
The distance between the farthest presenter and the TCC2 is max. 5 m (16ft).
The distance between the closest standing presenter and the TCC2 is min. 1m (3ft).
The distance between the TCC2 and other devices on the same installation surface
(e.g. lights, built-in air conditioners, projectors, etc.) is at least 0.5m (see “Positioning
in the room”).
Individual recommendations
Mounting in or below the ceiling
The minimum and maximum distances specified
here apply to the following variants:
Installed flush in an acoustic/coffered
ceiling
Mounted directly below the ceiling
Mounted on a VESA bracket
To ensure that the TCC2 provides complete and
seamless coverage, we recommend observing the
following distances during planning:
The distance between the TCC2 and the
farthest presenter is a maximum of 5m (16ft).
The distance between the TCC2 and the
closest presenter is at least 0.5m (1.6ft).
The distance between the TCC2 and the floor
is at least 2.50m (8ft).
Mounting below the ceiling (suspended)
With the “Variant 3” installation option (suspended
from the ceiling), we recommend adhering to the
following distances during planning:
The distance between the farthest presenter
and the TCC2 is a maximum of 5m (16ft).
The distance between the TCC2 and the
closest standing presenter is at least 1m (3ft).
The distance between the TCC2 and the floor
is at least 2.50m (8ft).
The distance between the suspended TCC2
and the ceiling is a maximum of 5m (16ft).
Fig. 12: Correct installation in or below the ceiling
max. 3 m (10 ft)
max. 5 m (16 ft)
max. 5 m (16 ft)
Fig. 13: Proper suspended installation from the ceiling
min. 2,5 m (8 ft)
1305378
max. 5 m (16 ft)
min. 1 m (3 ft)