User Guide

2023-01 | v2.0
Planning guide for system integrators
TeamConnect Ceiling 2
Alternative installation in the room
In addition to the classic installation in or below the ceiling, there are two other variants for mounting
the TCC2 in the room. Both variants are suitable for rooms that cannot accommodate conventional
installations below the ceiling because of their characteristics or furnishings.
Variant 5
Mounted on a pedestal in the room
In an unconventional room with round tables,
decorative walls or ceilings, etc., the TCC2 can
be mounted upside down on a pedestal in the
middle of the room. With flexible coverage of 180°
horizontally and 360° vertically, the TCC2 will
reliably capture everyone’s speech within a 4m
(13ft) radius.
The SL CM FB (Art.no. 506846) ceiling mounting
frame should be used to additionally secure the
TCC2 against falling from the pedestal or from
a fixed elevation. For further information, see
“Mounting on a pedestal in the room”.
Variant 6
Mounted vertically on the wall
Mounting the TCC2 vertically on a wall is also
suitable for rooms where classic installation be-
low the ceiling is not possible.
When mounting vertically, note that there may be
greater differences in volume between individual
participants, according to their distance from the
unit. However, mounting on the wall has no effect
on the final acoustic result.
For mounting on the wall, the SL CM FB
(Art.no. 506846) ceiling mounting frame is
required. For further information, see “Mounting
on the wall”.
Please note that with this installation
plan, there should be no presenters
directly in front of or with their backs
to the TCC2. The distance between the
TCC2 and the nearest presenter should
be at least 1m (3ft).
Fig. 10: Var. 5 – mounted on a pedestal in the room
Fig. 11: Var. 6 – mounted vertically on the wall