User Guide

2023-01 | v2.0
Planning guide for system integrators
TeamConnect Ceiling 2
Obstacles on the ceiling
If there are obstacles on the ceiling, such as
a suspended projector, they can be easily
excluded from the active detection zone by
specifying the exact horizontal angle and, most
importantly, the vertical angle. After activating
the Exclusion Zone, the audio signals from
this area are no longer picked up directly, but
rather only as quiet reflections in the room.
Example
In a room, a projector has already been
installed in the ceiling. The TCC2 is located at
least one meter away from the projector and
clearly picks up the noise from the cooling
fan.
The Control Cockpit software precisely
localizes the incoming audio signals and
visualizes them with a yellow dot under
“Zones” (Fig. 18).
By defining and activating an Exclusion Zone
for the localized area, the constant fan noise is
not picked up directly anymore and therefore
highly attenuated (Fig. 19).
Fig. 18: Exclusion Zone for a projector
Fig. 19: Simulated view with activated Exclusion Zone