Instruction manual

Mounting and installing the products
22 | SpeechLine IS microphone series
Mounting microphones to the ceiling
Some microphones of the IS series can also be mounted to a ceiling panel
or wooden board of a suspended ceiling.
A) Mounting the MEB 102boundary layer to the ceiling
Once you have chosen a position fo
r the product (see page 16):
왘 Remove the ceiling panel or the wooden boar
d and place it on a surface
that is suitable for drilling.
왘 Drill a hole with a diameter of 25 mm through the ceiling panel or
wo
oden board (plate thickness 10 mm - 65 mm).
왘 Slide the first rubber ring over the
threaded bolt of the microphone
button and then insert the microphone into the drilled hole.
왘 Slide the second rubber ring over the threaded bolt and tighten the hex
nut.
왘 Connect a suitable cable (see page 26), lay the cable
and remount the
ceiling panel or wooden board.
MEG 14-40L
MZH 30xx-L
MZT 30
MZS 31
ME 34|35|36
MZH 30
MZC 30
A
C
B
XLR-3
MZT 30
MZH
3015w
MZT 30
MZC 30
MZH 30
ME 34
ME 35
ME 36
+
+++
MEB 102
25 mm
10 mm –
65 mm