Manualshelf

Users Manual

ManualsBrandsSennheiser ManualsPro AudioSpeechLine Digital Wireless SL Headmic Set DW-4-US R Wireless Mic with Rackmount Kit
61626364656667686970
SL Rack Receiver DW
64
Installing the receiver in a rack
To install the receiver in a rack:
▷ Use the two supplied recessed head screws to secure the blanking
plate from the GA 4 mounting kit to the mounting angle of the receiver
as shown.
Make sure to use the correct side (the one with the round holes) of the
blanking plate to secure it to the mounting angle.
►
▷ Only insert the two small covering caps into the antenna holes if you do
not wish to install the rod antennas at the front of the rack.
▷ Slide the receiver with the attached mounting accessories into a 19"
rack.
Mounting the rod antennas to the front of the rack
To mount the rod antennas to the front of the rack:
▷ Connect the included antenna cables to the antenna sockets at the rear
of the receiver.
▷ Pass the other ends of the antenna cables through the antenna holes in
the blanking plate and screw them to the rod antennas as shown.
►