Users Manual

Recommendations on antenna mounting

Option 1: Connecting the AWM 2 or AWM 4 antenna

wall mount directly to the receiver(s)

You can connect one receiver directly to one AWM 2 antenna wall mount

or you can connect two receivers directly to one AWM 4 antenna wall

mount.

►

•For the AWM 2, you can use Sennheiser extension cables CL 5/10/20.

•For the AWM 4, you can use Sennheiser extension cables CL 1/5/10/20

PP.

Observe the following information when using extension cables:

Signal loss due to extension cables

In this scenario, using extension cables for remote antenna mounting re-

sults in a loss of transmission power, depending on the cable length.

You can compensate this signal loss by configuring the transmission pow-

er of the receiver accordingly.

▷ Observe the following minimum transmission power settings (SL Rack

Receiver DW: System Settings menu -> RF Power) for the respective

cable lengths:

• Cable length of 5 m -> at least level 1

• Cable length of 10 m -> selected level +1, at least level 2

• Cable length of 20 m -> selected level +1, at least level 3

• Cable length of 25 m and longer -> selected level +2, at least level 4