Users Manual

The SL PASC 4 passive antenna splitter
158
Mounting the jointing plate and fastening the mounting angles (to install
two antenna splitters side by side)
To fasten the mounting angles:
▷ Remove the two recessed head screws on both outer-facing sides of
the antenna splitters.
▷ Fasten the mounting angles to the outer-facing sides of the antenna
splitters using the previously removed recessed head screws.
To mount the jointing plate:
▷ Place the two antenna splitters side by side on a flat surface with the
undersides facing upward.
▷ Screw the two antenna splitters together using the jointing plate and
the six recessed head screws, as shown in the figure.
►
▷ Screw the unit consisting of the two antenna splitters into a 19" rack.