Users Manual

The SL Tablestand 153-S DW
102
Switching the table stand on/off
To switch the table stand on:
Press the ON/OFF button for 1 second.
The button lights up green when a goose neck microphone is connect-
ed.
To switch the table stand off:
Press the ON/OFF button for 3 seconds.
Muting the table stand
To mute the table stand:
While the table stand is switched on and a goose neck microphone is
connected, press the ON/OFF button for 1 second.
The button lights up red when the audio signal is muted.
•In Push to talk mode, the audio signal is muted by default and is only
activated while the ON/OFF button is pressed.
•In Push to mute mode, the audio signal is active by default and is only
muted while the ON/OFF button is pressed.
You can set the mute mode in the menu of the SL Rack Receiver DW
or using the Sennheiser Control Cockpit.