User Manual

SL Rack Receiver DW
67
Attaching the mounting angles
The mounting angles are designed to help protect the operating elements
from damage or deformation, e.g. if the receiver is dropped. We therefore
recommend always attaching the mounting angles, even if you do not want
to mount the receiver into a rack.
To fasten the mounting angles:
▷ Unscrew and remove the two recessed head screws on each side of the
receiver.
▷ Secure the mounting angles to the sides of the receiver using the pre-
viously removed recessed head screws.
Make sure that the angled ends of the mounting angles point forward.
►
Connecting the rod antennae to the receiver
To connect the supplied rod antennae to the receiver:
▷ Screw the two rod antennae into the receiver's two antenna sockets,
ANT I and ANT II, as shown.
▷ Align the rod antennae vertically.
►
Connecting the AWM 2 / AWM 4 remote antenna to the receiver
Instead of the supplied rod antennae, you can also connect a remote anten-
na to the receiver. For more information, see „The AWM 2 antenna wall
mount“ and „The AWM 4 antenna wall mount“.
▷ Pay attention to the notes about antenna installation under „Recom-
mendations on antenna mounting“.