User Manual

SL Rack Receiver DW
65
Integrating the receiver into a network without DHCP using Fixed IP
If there is no DHCP server in the network and you are working with fixed IP
addresses, please observe the following information.
▷ Set the Mode to Fixed in the receiver’s Network Settings menu.
▷ Manually enter an IP address in the IP option in the receiver’s Network
Settings menu.
To add the receiver in the Sennheiser Control Cockpit:
▷ Use the Add Device function in the Sennheiser Control Cockpit and
enter the IP address you selected.
Or:
▷ Activate the mDNS function in the receiver’s Network Settings menu
(factory setting: deactivated).
▷ Restart the receiver.
Once restarted, the receiver is automatically detected in the Sennhe-
iser Control Cockpit.
mDNS = multicast Domain Name System: resolves host names to
IP addresses within small networks that do not include a local name
server. Used for automatic device discovery.
Updating the firmware
The firmware of the receiver is updated using the Sennheiser Control
Cockpit software.
You can find more information about this procedure in the software in-
struction manual in the Sennheiser Documentation app or in the down-
load area of the Sennheiser website at www.sennheiser.com/download.
Sennheiser Control Cockpit instruction manual
Download area for the Sennheiser website