User Manual

The CHG 4N charger
166
Controlling and monitoring the CHG 4N charger
over the network
You can connect the CHG 4N charger to a network using a router or switch,
which allows you to monitor and control the accupack’s charge level using
the Sennheiser Control Cockpit software and to modify the CHG 4N char-
ger’s network configuration.
For more information on controlling a system in the network using the
Sennheiser Control Cockpit software, refer to the instruction manual of
the software.
Please note that the host PC on which the Sennheiser Control Cockpit
Service is installed must be in the same network as the devices that are to
be monitored and controlled.
Connecting the CHG 4N charger to the network
To connect the charger using the Sennheiser Control Cockpit app:
▷ Connect a standard network cable (at least Cat 5) to the Ethernet sock-
et of the charger.
▷ Connect the other end of the network cable to the network, e.g. to a
switch or router, or directly to a PC to make initial configuration easier.
The yellow LED next to the CHG 4N charger’s Ethernet socket indicates the
connection status:
Yellow LED:
• On -> The charger is connected to the network
• Off -> The charger is not connected to the network
►