User Manual

The SL DI 4 XLR Dante™ interface
149
Changing the settings
The configuration window allows you to adjust the following settings for
each analog XLR input (IN 1, IN 2, IN 3, IN 4):
►
Gain
▷ Select the level adjustment for the desired input from the drop-down
list
-12 dB
• Attenuation of -12 dB. At the front of the SL DI 4 XLR, the PAD LED of the
selected input lights up.
0 dB
• No LED lights up.
+15 dB
• At the front of the SL DI 4 XLR, the +15 LED of the selected input lights
up.
+30 dB
• At the front of the SL DI 4 XLR, the +30 LED of the selected input lights
up.
+45 dB
• At the front of the SL DI 4 XLR, the +45 LED of the selected input lights
up.
Phantom
▷ Tick the check box to activate the phantom power for the desired input.
At the front of the SL DI 4 XLR, the P48 LED of the selected input lights
up.