User Manual

Performing a walk test (reception quality)
125
Performing a walk test (reception quali-
ty)
The Walk Test menu item allows you to check the reception quality of your
radio links within the operating environment. By performing a walk test,
you can verify the range and coverage of the radio link.
To perform the walk test:
▷ Switch on the transmitter and the receiver of the radio link you want to
check.
▷ In addition, switch on all other devices that you want to use in the op-
erating environment.
▷ From the receiver's System Settings menu, select the Walk Test
menu item.
The RF signal level display appears on the display panel of both the re-
ceiver and the transmitter.
►
▷ Walk the operating environment with the transmitter.
The RF signal level display on the display panel of both the receiver and
the transmitter is continuously updated.
▷ Check the RF signal level display for more detailed information on the
reception quality:
Good reception quality is indicated by a tick.
If the tick is missing, reception quality is sufficient.
If reception quality is or was compromised at any position, this is
indicated by a warning triangle.
The warning triangle remains displayed on the display panel even if
reception quality improves afterwards.
NO LINK: If the radio link breaks down completely, the background of the
display panel changes back and forth between light and dark and No Link
appears on the display panel.
▷ Press the ESC button on the receiver to end the walk test.