User Manual

Pairing
123
Pairing a receiver with a transmitter
To establish a new radio link between a receiver and a transmitter, proceed
as follows:
Long-press the PAIR button of the receiver until its status LED flashes
alternately green and red.
First, Identify appears on the display panel of the receiver. The Pairing
message then appears. Any existing radio link is now disconnected.
You now have 90 seconds to establish a radio link with a new transmit-
ter.
Long-press the PAIR button of the corresponding transmitter until its
status LED flashes alternately green and red.
The Press pair on receiver message appears on the display panel of
the transmitter (SL Handheld DW and SL Bodypack DW only).
Pairing for both SL Handheld DW and SL Bodypack DW.
Pairing for SL Tablestand 133-S/153-S DW and SL Boundary 114-S DW: