Users Manual

Installing the L 6000 | LM 6060 | LM 6061 | LM 6062
72
Connecting/disconnecting the L 6000 to/from the
power supply system
To connect the L 6000 to the power supply system:
Connect the mains cable IEC connector to the power socket on the rear
side of the L 6000.
Connect the mains cable plug into a suitable wall socket.
To completely disconnect the L 6000 from the power supply system:
Unplug the mains cable plug from the wall socket.
Unplug the mains cable IEC connector from the power socket on the
rear side of the L 6000.