Users Manual

Using the EM 6000
116
Step 3: Starting the automatic frequency setup
If you have performed the scan and edited the frequencies, you can start
the automatic frequency setup.
►
On the display, the Party option must be highlighted in white.
▷ Press the jog dial to display the next step.
►
▷ Turn the jog dial to choose whether the sync settings are also to be
transmitted during the synchronization.
▷ If you do not activate this option, only the frequency is sent to the re-
spective transmitters.
▷ Press the jog dial to start the automatic frequency setup.
The setup is performed for all receivers that are available in the net-
work. Note that the Auto-Setup option in the System menu item must
be activated for all of the receivers.