Specifications

STICK-ON
®
SERIES
Model STD Series
Divider/Combiner Networks
ANYWHERE YOU NEED...
• To Combine Audio Signals to a
Single Output
• To Filter RF from an Audio Line
• To Combine Stereo Signals
• To Feed a Mono Signal to Stereo Inputs
• To Combine Multiple Mics to a
Single Input
You Need The STD Series!
The STD series of products is part of the STICK-ON line of products from Radio Design Labs. It is a
resistive branching network with RF filtering on each of the four channels. Any channel, A through D, may
be either input or output. This permits combining stereo signals into mono inputs, splitting mono signals to
multiple inputs, and even combining microphones with output shorting switches into a single amplifier
input. The STD products are available in 150 Ω, 600 Ω and 10 kΩ models. All inputs and outputs are
balanced.
STD Functional Block Diagram
RDL • 659 N. 6
th
St. • Prescott, AZ., USA 86301 • [phone] • FAX [phone] • www.rdlnet.com