User guide

3
Capabilities of the “WSM”
The “Wireless Systems Manager” (WSM) permits real-time monitoring as
well as remote control of all relevant receiver parameters in the live mode.
Using the “WSM” PC software, you can:
y Display and monitor the receivers connected to the NET 1 system,
y Configure the receivers,
y Perform a frequency preset scan,
y Control 3000/5000 systems, combined systems and multichanel
systems with more than 20 channels,
y Update the firmware of the NET 1,
y Update the firmware of the receivers and transmitters via the NET 1.
System requirements
Required hardware
Processor: Intel Pentium 4 or AMD Athlon XP, 2 GHz or higher
RAM: at least 512 MB (1 GB recommended)
Hard drive: min. 30 MB available
Drives: • CD-ROM or DVD-ROM
• drive for data backup
Ports: LAN 1 Ethernet port (100 Mbit)
Screen resolution: 1280 x 1024 pixels
Required operating system
The “WSM” PC software supports the following operating systems:
y Windows 2000 with SP4 or higher
y Windows XP Professional with SP2 or higher
y Windows XP Home Edition with SP2 or higher