User guide

21
Working with panels
To work with the panels:
왘 Select the panel you wish to work with.
왘 Click on the panel using the right mouse button.
A contextual menu appears.
Properties...
Opens the device window in which you can set various parameters in the
selected receiver.
Delete
Removes the selected panel from the display field. The receiver continues
to appear in the system window and can be pulled into the display field.
View Style
Displays a submenu with a selection list of three different display modes
for the panels:
Show/hide panel
To provide a better overview, you can remove from the display field panels
that you do not want to monitor or configure.
왘 Select “Delete” in the contextual menu.
The panel no longer appears in the display field.
To restore deleted panels:
왘 Click on the receiver in the system window and hold down the mouse
button.
왘 Now drag the receiver into the display field.
A new panel appears.
To show all receivers in the display field as panels:
왘 Click on “System” > “Refresh Device List” in the menu bar.
Note:
The display field can hold a maximum of 30 panels. If more than 30
receivers are connected, you can use the scroll bar to bring the
remaining panels into view.