User guide

11
Updating the firmware in the NET 1
The NET 1 is delivered with the most current firmware. You can transmit
future firmware to the NET 1 by following the procedure below.
To update the NET 1:
왘 Click on “Applications” > “Firmware Update” in the menu bar. A new
window opens.
왘 Click on “OK”.
The firmware in the NET 1 is updated.
On the NET 1, the yellow LED “REMOTE” lights up.
The window to the left opens.
The firmware is transmitted to the NET 1.
After the NET 1 has been updated successfully, the window to the left
appears.
왘 Click on “OK”.
The window to the left opens. This window requests, once again, that you
hold the transmitters in front of the infrared port. However, since you have
already updated the transmitters, ignore this request.
왘 Click on “Close”.