Spec Sheet

FEATURES
Shockmount for MZH goosenecks

Significantly reduces transmitted body

noise from table or lectern
Non reflective black coating

ARCHITECT’S
SPECIFICATIONS
A sturdy shockmount for gooseneck
microphones shall be unobtrusive in
design. A rubber notch shall securely
hold a gooseneck microphone with a
diameter of 19mm (0,74“).
It shall reduce the transmission of
unwanted body noise from the surface
it is installed to.
The coating of the shockmount shall be a
non reflective black. The shockmount shall
be Sennheiser MZS 31.
The MZS 31 is an unobtrusive but
sturdy shockmount for installa-
tion in tables, lecterns or other
surfaces. It reliably holds a MZH
gooseneck and reduces body
noise transmitted from the table
or lectern to the microphone. It
features a non reflective black coating.
TECHNICAL DATA
Overall diameter .................................................. 74mm (2,76“)
Overall depth ........................................................60mm (2,36“)
Depth under flange .............................................50mm (1,97“)
Required cut-out hole .........................................51mm (2,01“)
Color .......................................................................matte black
Delivery ..................................................................MZS 31
MZS 31 installed sound microphone shockmount