Specifications

RANE/SAMSON
HC-4
Four Stereo Headphone Amplifier
Four people want to listen to the same mix
under headphones. Simple, just take the
HC 4, plug in, turn on, adjust your indi-
vidual volumes, and groove.
HEADPHONES
655
PHOTO - VIDEO - PRO AUDIO
ORDER & INFO. [phone] • FAX: [phone] [phone]
1-800-875-6951 • www.bhphotovideo.com
SAMSON S•PHONE
Four-Channel Headphone Mixer/Amplifier
The S•Phone is a versatile single rack space
four channel headphone amplifier, loaded
with advanced features that provide
tremendous flexibility for monitor and cue
mixing. The Master Input features an input
level and LED meter to control and display the overall stereo input. A convenient Stereo Auxiliary input is provided on each
channel allowing individual line signals from direct or buss outputs to be mixed with the main stereo input. A Balance control
adjusts the ratio of the Main and Auxiliary signal or the left to right balance (based on the setting of the ST/2CH switch) so that
each headphone mix can be further tailored for a particular listener’s individual needs (“More Me
”).
◆ Tw o master stereo inputs plus stereo link
output
◆ 8-segment LED metering on each channel
and master
◆ 2-band EQ on each of the four channels
◆ Three headphone outputs per channel (one
front and two rear panel) with an overall
volume control and individual level meters.
◆ Auxiliary input with balance control pro-
vides four channels of“More Me”mixing
◆ Mute and Stereo/2-channel mode switches
on each channel
◆ Maximum output power on each channel
(regardless of headphone impedance)
◆ Three-year warranty
HC-6 Six Stereo Headphone Amplifier
Featuring six stereo headphone
amplifiers, the HC 6 performs a number
of necessary tasks, not all of which are
headphone related. The HC 6 provides
Master stereo Inputs which can be used to drive any or all of the 6 stereo headphone amplifiers. A Mono switch is provided on the front
panel to drive both channels of all 6 amplifiers from a common mono source.
◆ Six individual unbalanced stereo inputs are available to drive any
individual amplifier from a separate stereo source.
◆ Under most conditions, the HC 6 produces sound pressure levels in
excess of 120 dB. More than adequate for most listeners.
◆ Outputs for all six channels are provided on the front panel and on
the rear panel.
◆ Tw o pairs of headphones may be driven from each channel.
◆ Inputs can be converted to mono balanced Inputs through internal
jumpers if required.
◆ Delivers up to 450 milliwatts into headphones with rated impedances
between 32-600 ohms. The precise amount of power depends on the
exact impedance of the headphone in use and the number of head-
phones connected to the unit.
◆ Master stereo Inputs which can be used to
drive the four stereo headphone amplifiers.
◆ A Mono switch is provided on the front
panel to drive both channels of all four
amplifiers from a common mono source.
◆ Delivers up to 200 milliwatts into head-
phones with rated impedances between 32-
600 ohms (depends on the exact impedance
of the headphone in use and the number of
headphones connected to the unit).
◆ Under most conditions, the HC 4 produces
sound pressure levels in excess of 120 dB.
This level is more than adequate for most
listeners.