Bluetooth® Headset EZX 60 Instruction manual
Quickguide EZX 60 Charging Power on/off 1 2h EU UK US AU OFF ON 5s 5s ON OFF Adjusting the volume Pairing 2 2 OFF 20 cm 8s Vol + Pairing Vol – EZX 60 OK Phone Keyword 0000 Accepting and ending calls
Contents Contents Important safety information ........................................................................... 2 Delivery includes .................................................................................................. 4 Features of the EZX 60 ....................................................................................... 5 Operating elements ............................................................................................. 6 Overview of pictograms ................
Important safety information Important safety information The EZX 60 has been manufactured according to the accepted rules of safety and current technology. However, there is still a danger of damage to equipment if the following general safety instructions are not complied with. • Read this instruction manual. • Follow these instructions. • Keep this instruction manual in a location where it is accessible to all users at all times.
Important safety information During operation • • • • • Avoid listening at high volume levels for long periods since this leads to permanent hearing damage. Observe your country’s regulations for the use of mobile phones, headsets and hands-free equipment in traffic. Always focus your attention on driving safely! This equipment generates, uses and can radiate radio frequency energy and, if not used in accordance with the instructions, may cause harmful interference to radio communications.
Delivery includes Delivery includes 1 EZX 60 Bluetooth headset with built-in rechargeable Lithium-Polymer battery 1 earhook, flexible 1 EZX 60 power supply (EU/UK/US/AU version) 1 quick guide 1 safety guide 4
Features of the EZX 60 Features of the EZX 60 • Flexible and removable earhook for easy wear • Can be worn on either left or right ear • Bluetooth 2.1 + EDR: compatible with all Bluetooth 1.1, 1.2, 2.0 and 2.1 devices that support the “hands free profile” (HFP) or “headset profile” (HSP) • Up to 7.
Operating elements Operating elements 쐇 쐃 Multi-function button 쐄 쐃 쐇 Socket for power supply 쐋 쐋 Earhook (flexible) 쐏 LED 쐏 쐄 Earpiece 쐂 Microphone 쐆 Volume down button 쐊 쐆 쐂 쐊 Volume up button 쐎 EZX 60 power supply (EU/UK/US/AU version) 쐅 Charging plug 쐅 쐎 6
Overview of pictograms Overview of pictograms Meaning of the pictograms for pressing a button Pictogram Meaning Briefly press this button. 2x Double-press this button. Keep this button pressed. Keep this button pressed for 5 seconds. 5s Meaning of the pictograms for the flashing of the LED Pictogram Meaning This pictogram symbolizes a flashing. This pictogram symbolizes an interruption. This pictogram symbolizes a time interval.
Overview of buttons Overview of buttons Button To be pressed To ...
LED indications LED indications Meaning during operation LED flashing Meaning during operation rapidly Pairing mode once every 5 seconds Searching mode once every 5 seconds Standby mode 3 times every 4 seconds Call establishment twice every 4 seconds Active call mode 5s 5s 4s 4s For a more detailed description of the LED indications, see “Switching the headset on” on page 11. When the LED 쐏 flashes three times every 5 seconds, the battery is almost empty.
Putting the EZX 60 into operation Putting the EZX 60 into operation Charging the headset battery If you charge the battery for the first time, allow charging for at least 2.5 hours without interruption. Later, 2 hours will suffice to fully charge the battery. The headset cannot be used during the charging process. To charge the battery in the headset: WARNING Danger of injury! Wearing the headset when charging can cause burns and injuries. 왘 Do not wear the headset when charging.
Putting the EZX 60 into operation When the battery is about to run flat: • The LED 쐏 flashes three times every 5 seconds. • A low battery warning (five beeps) is heard in the headset every 20 seconds. • You have several minutes of battery reserve. When the battery is empty, you first hear the five warning beeps and then a descending sequence of tones in the headset. The headset switches off. Switching the headset on To switch the headset on: 왘 Press the multi-function button 쐃 for at least 5 seconds.
Putting the EZX 60 into operation If a certain Bluetooth connection cannot be established, because the corresponding Bluetooth device is switched off or out of range, you can manually re-establish the connection as follows: 왘 Switch off the Bluetooth visibility of all Bluetooth devices in the vicinity, except for the Bluetooth device you want to connect to. 왘 Press the multi-function button 쐃. The LED 쐏 flashes once every 5 seconds, indicating that the headset is in searching mode.
Putting the EZX 60 into operation To enter pairing mode: 왘 Press and hold the multi-function button 쐃 for 8 seconds. 8s A sequence of ascending tones is heard in the headset and the LED 쐏 flashes rapidly, indicating that the headset is in pairing mode. 쐏 EZX 60 OK Keyword 0000 왘 Once the headset is detected by the mobile phone, select “Sennheiser EZX 60” and connect.
Using the EZX 60 Using the EZX 60 Wearing the headset WARNING Danger of accidents! The headset can draw off your attention and cause accidents. 왘 Do not wear the headset in an environment that requires your special attention (e.g. in traffic or when performing skilled jobs)! 왘 Switch the headset on (see page 11). 왘 Put the headset on your ear. 왘 Carefully shape the earhook 쐋 so that it follows the contour of your ear and gives a very secure fit.
Using the EZX 60 Calling Provided the headset is switched on, paired and within the transmission range of a mobile phone (see page 12), you can accept and make calls with the EZX 60. Accepting a mobile phone call When you receive a call via your mobile phone and the headset is already switched on, you hear a ring tone in the headset and the LED 쐏 flashes 3 times every 4 seconds. If the mobile phone is set to silent alert or vibrating alert, you will hear no ring tone in the headset.
Using the EZX 60 Voice dialling* The voice dialling function must be supported by your mobile phone or Bluetooth device, supporting “hands free profile” (HFP) respectively, and be activated. 왘 Press the multi-function button 쐃. Two ascending beeps are heard in the headset. 왘 Say the name of the other party that you recorded in the phone. The mobile phone or Bluetooth device automatically dials the corresponding number. If voice dialling is successful, two ascending beeps are heard in the headset.
Using the EZX 60 Transferring an active call from the headset to the mobile phone* 왘 Double-press the multi-function button 쐃. A low confirmation beep is heard in the headset. The call audio is transferred to the mobile phone. The headset returns to standby mode. * This function must be supported by the mobile phone. 2x 쐏 Muting/unmuting the headset’s microphone To mute the headset’s microphone during a call: 왘 Press and hold the multi-function button 쐃 for 1 to 2 seconds.
Using the EZX 60 Changing the speaker volume WARNING Hearing damage due to high volumes! Listening at high volume levels for long periods can lead to permanent hearing defects. Please protect your hearing. Sennheiser headsets also sound exceptionally good at low volumes. 왘 Set the volume to a medium level. You can only adjust the speaker volume during an active call: 왘 To increase the volume step-by-step, press the volume up button 쐊. 왘 To reduce the volume step-by-step, press the volume down button 쐆.
Using the EZX 60 If you are out of the transmission range Calling is only possible in the Bluetooth transmission range of the mobile phone or Bluetooth device, respectively. The transmission range largely depends on environmental conditions such as wall thickness, wall composition etc. With a free line of sight, the transmission range of most mobile phones or Bluetooth devices is up to 10 meters.
Cleaning and maintaining the EZX 60 Cleaning and maintaining the EZX 60 CAUTION Liquids can damage the electronics of the device! Liquids entering the housing of the device can cause a short circuit and damage the electronics. 왘 Keep all liquids far away from the device. 왘 Do not use any cleansing agents or solvents. Cleaning the headset 왘 Only clean with a dry cloth. Do not use any liquids, solvents or cleansing agents.
Accessories Accessories The following EZX 60 accessories are available from your specialist dealer: Cat. No.
Specifications Specifications EZX 60 Dimensions 55 x 26 x 58 mm (W x H x D) Weight approx. 12 g Standby time up to 300 hrs Talk time up to 7.5 hrs Charging time before first use: 2.
Manufacturer declarations Manufacturer declarations Warranty regulations Sennheiser Communications A/S gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner.
Manufacturer declarations Changes or modifications not expressly approved by Sennheiser electronic Corp. may void the users authority to operate the equipment. This Class B digital apparatus complies with Canadian ICES-003. Rechargeable batteries The supplied rechargeable batteries can be recycled. Please return them to your specialist dealer or to your Sennheiser partner.
Sennheiser Communications A/S Langager 6, 2680 Solrød Strand, Denmark www.sennheisercommunications.com Publ.
