Instruction manual and frequently asked questions - Evolution Wireless Digital (EW-D | EW-DX)

EW-D EM rack receiver
52
AUTO SCAN menu item
Under the AUTO SCAN menu item, you can perform an auto-
matic frequency scan of your area. This enables you to easily
find and assign free radio frequencies.
The scan starts at the lowest frequency in the device’s fre-
quency range.
▷ Open the AUTO SCAN menu item.
The scan starts automatically. The next free frequency is
shown on the display.
►
▷ Press the SET button to accept the displayed frequency.
or
▷ Press the UP or DOWN button to display the next free fre-
quency.
or
▷ Press the ESC button to cancel the scan.
The previous frequency remains unchanged.
If you have set a new frequency, you must still synchro-
nize the receiver with the transmitter to establish the ra-
dio link (see „Establishing a radio link | Synchronizing the
receiver and transmitter“).