Instruction manual and frequently asked questions - Evolution Wireless Digital (EW-D | EW-DX)

EW-DX EM 2 rack receiver
124
setup are performed for both channels of the receiver as
well as for all other receivers available in the network.
▷ Press the jog dial to open your selected option.
▷ Select a frequency from which to start the scan.
▷ Press the jog dial to start the scan.
The spectrum is scanned for free frequencies above the se-
lected frequency.
After the scan free frequencies are displayed, which you
can then assign to the channels.
▷ Press the jog dial to assign the free frequencies to the re-
ceiving channels.
or
▷ Press the ESC key to cancel and not assign new frequen-
cies.
▷ Next, synchronize the receiving channels with the corre-
sponding transmitters to establish the radio link at the new
selected frequencies („Synchronizing the receiver and
transmitter“).